@gare You can get RetroArch to run in verbose mode by choosing to launch with verbose logging. Seems like an issue with the audio - perhaps PulseAudio/Pipewire gets stuck ? Does it happen also with standalone emulators (i.e. Mupen64plus or PPSSPP) ?

@Alfa How did you solve the problem?

@mitu Heh, well. At least it works, right?

It's basically the same thing, but a different OS and some dependency installs.

@TPR Hey @TPR I am experiencing the same problem with my N64 roms. Did you end up fixing it? Thank you

Ok habe es selbst nun gelöst bekommen.

Habe wohl Cut Trace on Pin #18 nicht richtig durch geführt

Ok, I got it solved myself now.

I probably didn't carry out the cut trace on pin #18 correctly

Let me repeat my previous question - do you have a system override where the RetroArch settings are different for the gba system ? Is your gba system's configuration file custom/different from the default that RetroPie installs ?

Post the config file (/opt/retropie/configs/gba/retroarch.cfg) on pastebin.com. If you can, get a verbose log from RetroArch during this occurence and post it also on pastebin.com

@mitu Yes I did everything works Fine. I got a 1440p Monitor (as you probably alr know) and I switched to a 1080p Monitor everything works fine. I should prolly go check it on my 1440p Monitor again. I think the only thinks that won't load are the things happening on "console".

@Excalibas I fixed it commenting hdmi_safe 1 on config.txt

@mitu Thank you.
Only option 1 was possible for me.
My next step will be to buy a DualShock 4 gamepad.
Also, I will try to install OpenMediaVault to have NAS.

Can you post your config.txt boot configuration ? What version of RetroPie are you using ?

I was able to fix this issue. I tried a third television that it worked on. I guess retropie didn't like the refresh rate or resolution on my monitor originally? I was able to set the settings via the other TV and now everything works fine on the intended monitor.

@llivingst I ran into a similar issue when I updated a year old build on my pi 4. It would get to emulation station, but went to a blank screen when going into a game. It think it was crashing cause I could not exit back to emulation station or my video feed was gone. I know a lot of kernel changes were made, so maybe you have a custom configuration that interferes with the new kernel. But Step one would be to try switching hdmi ports. I remember that being in the wrong port did that before. If not, you might have to reimage a new build. I changed all my custom configs from overclocks to KMS drivers switched back to and still no go.

@RobbyThomas2525 Please don't open several topics for the same issue. I've merged your topics.
Please provide all the info asked in https://retropie.org.uk/forum/topic/3/read-this-first, this will help diagnosing the issue you're having.

@dankcushions Thanks a lot for the replies and for this last tip. I've learned a lot with this thread (core options are always saved if modified in-game, I should not mess with them xD, a way to revert them back to defaults...).
Br,
Dimas.

In case anyone else encounters the same issue, here are my config.txt settings:

# For more options and information see # http://rpf.io/configtxt # Some settings may impact device functionality. See link above for details # uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment this if your display has a black border of unused pixels visible # and your display can output without overscan disable_overscan=1 # uncomment the following to adjust overscan. Use positive numbers if console # goes off screen, and negative if there is too much border #overscan_left=16 #overscan_right=16 #overscan_top=16 #overscan_bottom=16 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output hdmi_force_hotplug=1 hdmi_ignore_edid=0xa5000080 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=2 #hdmi_mode=4 # THE ABOVE ARE WORKING, USE AS FALLBACK hdmi_group=1 hdmi_mode=16 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # Uncomment some or all of these to enable the optional hardware interfaces #dtparam=i2c_arm=on #dtparam=i2s=on #dtparam=spi=on # Uncomment this to enable infrared communication. #dtoverlay=gpio-ir,gpio_pin=17 #dtoverlay=gpio-ir-tx,gpio_pin=18 # Additional overlays and parameters are documented /boot/overlays/README # Enable audio (loads snd_bcm2835) dtparam=audio=on [pi4] # Enable DRM VC4 V3D driver on top of the dispmanx display stack dtoverlay=vc4-fkms-v3d max_framebuffers=2 [all] #dtoverlay=vc4-fkms-v3d overscan_scale=1 #hdmi_max_pixel_freq:0=200000000 #hdmi_max_pixel_freq:1=200000000